Aren’t they pretty? The cool thing about these Easter egg cake toppers is they’re 100% edible. You basically create a Candy Melt “shell,” let it set, add the filling of your choice, and seal it with another layer of Candy Melt. After a quick trip to the refrigerator, they pop right out of the mold looking all beautiful and flawless! The mold is made of silicone for super easy release, so they literally do just pop right out. Love it!

My favorite thing about these Easter egg cake toppers is no two are alike. The process all starts by creating the colorful “shell” on the outside of the egg and you can get as creative as you want with decorating it. I ended up using Candy Melts to splatter paint and brushstroke the mold before pouring a solid color over it to create my shells. This technique made for a really seamless look, but you can feel free to be as creative as you want with your toppers. Save the splatter painting and brush stroking for the end to get a more textured look, swirl your Candy Melt Colors, or do whatever else you’re imagining!

Once the eggs were made, I placed them on top of a yellow cake and piped more Easter-inspired colors all around them in a variety of textures. All of this gorgeous piping was made possible with just three of my favorite Wilton Tips: 1M (for the rosettes), 4B (for the stars), and 233 (for the dots of colorful grass). I paired these piping tips with six different buttercream colors and just piped away until I was satisfied. The textures are such a great match for these pretty Easter eggs!

Here’s a quick video of the techniques I used to create these colorful Easter egg cake toppers, plus some footage of how I decorated the rest of the cake:

If you love videos like this one, be sure to check out my YouTube Channel! There are tons of cake decorating and recipe videos there to inspire you and I’m always rolling out new ones. If you click Subscribe you can rest assured that you’ll never miss a new video! 

You Will Need

• An Egg Shaped Silicone Treat Mold
• 12 oz. Wilton Candy Melts in Bright White 
• Candy Decorating Primary Colors Set
• EZ Thin Dipping Aid 
• Bowls and spoons for color mixing
• 5 Piece Decorating Paint Brush Set
• Angled spatula
• ⅓ Cup filling of your choice (I went with cake pop filling)

Step 1: Melt and Tint the Candy Melts 

Melt the Candy Melts according to the package instructions, then add them to six separate bowls. Color the first three bowls using colors specifically made for Candy Melts (I used this Primary Colors Set and custom mixed the shades shown below). You’ll want to make these first three colors bold and vibrant, since they’ll be the colors of the “paint” on the outside of the shells. Candy Melts do come in all sorts of colors, so feel free to use pre-colored ones for this part if you want!

Use a little bit of the bold colors to tint the remaining three bowls and create pastel versions. These colors will be used as the shell behind the paint splatters and brushstrokes (we’ll get to those next!). 

If at any point your Candy Melts seem too thick, try adding some EZ Thin Dipping Aid or heat in the microwave for an additional few seconds. 

Step 2: Paint the Easter Egg Mold

Using the paint brush set, splatter paint and brushstroke the cavities of the Egg Shaped Silicone Mold with the bold Candy Melt colors until you love the look.

Let the painted mold set up at room temperature for 2-3 minutes before moving on to the next step. 

Step 3: Create the Easter Egg Shells

Fill each cavity in the Egg shaped mold with the pastel Candy Melts, right over the top of the painted designs. Gently tap the mold on a flat surface to make sure the entire cavity is covered evenly and let sit for about 3 minutes, or until a hard shell starts to form on the edges only.

Turn the mold over and pour out the excess Candy Melts onto a piece of wax paper.

Then, take an angled spatula and swipe over the top of the mold to remove any excess Candy Melts.

Refrigerate for at least 10 minutes to let the shells firm up. 

Step 4: Add the Filling 

Using the filling of your choice (I used cake pop filling for these), fill each cavity about ⅔ full. Be sure to leave enough room for more Candy Melt on top.

If your filling requires setting (most do), place the mold back into the refrigerator until your filling is nice and set. 

Step 5: Add More Candy Melts

Once the filling is set, add more of the melted pastel Candy Melts to the top (aka the back) of each egg.

Swipe off the excess with an angled spatula and place back into the refrigerator to set for at least 10 minutes. 

Step 6: Release

When your eggs are set, they’re so easy to remove from the silicone mold. They pop right out, and just look at how incredible the painterly designs show up!

You can serve these edible Easter eggs as a dessert all on their own, use them in your next Easter cake design, or add them to any of your bakes for a festive pop of color. Can’t wait for you guys to try this technique. And be sure to check out Wilton’s online shop for some super fun Easter themed baking supplies!

What kind of bakes are you making for Easter? Let me know in the comments below. And if you end up making these Easter eggs, be sure to tag @sugarandsparrowco on Instagram and show me!

The post Colorful (Edible!) Easter Egg Cake Toppers Tutorial appeared first on Sugar & Sparrow.